Conversion of Designs between CAD Systems
I offer a CAD data conversion service where designs are converted between different CAD formats. Please contact me for more information with the details of your requirements.
Conversion of Legacy CADSTAR Data
I offer a Legacy CADSTAR data conversion service where data for older versions of Cadstar for DOS is converted to more modern versions of CADSTAR, and sometimes converted to other CAD systems.
Designs can be checked and corrected if there are errors in the conversion process.
Customers are also provided with Gerber and Excellon Drill outputs, PDF drawings of any schematic diagrams, and Graphicode GC-Prevue GWK files. Depending upon the manufacturing requirements we can also provide Component centroid x/y position data and IPC-D-356 netlist data.
If you have only artworks, a blank PCB, or Gerber and Excellon data for your design I am able to re-create an intelligent CAD Design with netlist, re-create component libraries, and re-create an electrical schematic diagram.
I am very experienced at this process having perfomed this on many different designs.